Linhai M565Li T3 EFI, Service Manual, Page: 200 / 338

CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3- 101
☆
Immerse the thermostat in a beaker
with water. Make sure the thermostat is in
the suspended position without contact to
the vessel. Heat the water by placing the
beaker above a stove and observe the
temperature rise on a thermometer
☆
Take the temperature reading from
thermometer when the thermostat valve
opens.
Thermostat Valve Opening
Temperature: 71
℃± 3℃
Tool: Thermometer
☆
Keep heating the water to raise the wa-
ter temperature. When the water tempera-
ture reaches the specified valve, the ther-
mostat valve should have been lifted by 3.
5-4.5mm
☆
If thermostat valve opening temperature
or thermostat valve lift does not reach the
standards, replace it.
●
Install thermostat: reserve the removal
procedure for installation
☆
Apply coolant to the rubber seal of
ther-mostat
☆
Install thermostat housing. Tighten to
the specified torque:
Tightening Torques: 10N
·
m
3.4.8 Water Pump
Water pump cover
①
Thermostat
②
String
Wate
③
Stove
④
Thermostat
Lift valve
Apply coolant