Linhai M565Li T3 EFI, Service Manual

Page: 234 / 338

CHAPTER 3 ENGINE
M565Li T3 EFI SERVICE MANUAL 20.0
CHAPTER 3 ENGINE PAGE. 3- 124
Motor
-Scanner is a precision instrument and should be protected from vibration and
impact.
If the unit does not run correctly or the screen is unstable
when first turned on,
disconnect it from the main lead and try again.
Make sure the DLC is always firmly inserted into the diagnostic socket.
Never test electrical signals that exceed the limit of specifications.
Test cannot be performed by the perso
n who is driving the car.
This unit should be used and stored in the following conditions:
Ambient temperature: 0~50
℃
Relative humidity: <90%
3.5.8.3 Configurations
Delphi Motor scanner consists of 2 main part: the main units (with diagnostic main cable)
and diagnostic connector link (one end is 6PIN connector; the other is the interface for
connecting diagnostic main cable). They are shown in figure 34 as below.
Outline of Main Unit