LifeFitness DISCOVER SE3, Operation Manual

Page: 30 / 77

29
Inactive Active Very Active
Treadmill 2 - 3 mph (3.2 - 4.8 kph) 3 - 4 mph (4.8 - 6.4 kph) 3.5 - 4.5 mph (5.6 - 7.2 kph)
Cross-Trainer
L 2-4 men
L 1-2 women
L 3-10 men
L 2-5 women
L 7-15 men
L 3-10 women
Lifecycle Exercise Bikes
L 4-6 men
L 2-4 women
L 5-10 men
L 3-7 women
L 8-14 men
L 6-10 women
PowerMill Climber L1 - L4 L3 - L7 L6 - L11
FlexStrider
L6 - L10 L8 - L10 L10 - L14
LIFE FITNESS FIT TEST

The Life Fitness Fit Test estimates cardiovascular activity and can be used to monitor improvements in
endurance every 4 - 6 weeks.

The Fit Test is considered to be a submax VO2 (volume or oxygen) test and gauges how well the heart supplies
oxygenated blood to the exercising muscles and how effi ciently those muscles receive oxygen from the blood.

Physicians and exercise physiologists generally regard this test as a good measure of aerobic capacity.

Workout duration is 5 minutes total.

Take the Fit Test under similar circumstances each time. For the most accurate Fit Test results, you should per-
form the Fit Test on three consecutive days and average the three scores.

To receive a proper Fit Test score, the work done must be within a training heart rate zone that is 60% to 85% of
the theoretical maximum heart rate (HRmax).
The user must grasp the hand sensors when prompted, or wear a Polar telemetry heart rate chest strap as the test score
calculation is based on a heart rate reading.
Note: The workout will be terminated if a heart rate is not detected after 2.5 minutes.
Your heart rate is dependent on many factors, including:

amount of sleep the previous night
(at least 7 hours is recommended)

time of day

time you last ate (2 - 4 hours after the last meal is recommended)

time since you last drank a liquid containing caffeine or alcohol, or smoked a cigarette (at least 4 hours is rec-
ommended)

time since you last exercised (at least 6 hours is recommended)
Suggested exertion levels should be used as a guideline for setting up the Fit Test program. The goal is to elevate the
user’s heart rate to a level that is between 60%-85% of their theoretical maximum heart rate.