LifeFitness DISCOVER SE3, Operation Manual

Page: 8 / 77

7
IMPORTANT SAFETY INSTRUCTIONS
CROSS-TRAINER & FLEXSTRIDER

WARNING:
The Cross-Trainer and FlexStrider are not equipped with a free-wheeling fea-
ture. Therefore, the products cannot be stopped immediately.

Do not stand or sit on the rear plastic covers of the Cross-Trainer.

Do not stand on center tube of the Cross-Trainer.

The individual human power required to perform an exercise may be different than the mechanical power
displayed on the Cross-Trainer and FlexStrider.

Use caution when mounting or dismounting the Cross-Trainer and FlexStrider. Before mounting, use the mov-
ing arms to bring the pedal nearest to you to the lowest position. Use the stationary handlebars whenever ad-
ditional stability is required. While exercising, hold onto the moving arms.

Never face backward while using the Cross-Trainer or FlexStrider.
LIFECYCLE EXERCISE BIKES

WARNING:
Allow a distance of 16 in. (41 cm) between the widest part of the bike and
other objects on either side. Provide at least 3 ft. (0.9 m) between the front or rear of the Life Fitness bike to any
other objects and 2 ft. (0.6 m) in the direction the equipment is accessed from.

Do not stand or sit on plastic shrouds.

Use caution when mounting or dismounting the Lifecycle Exercise Bike. Use the stationary handlebar whenever
additional stability is required.
GSC TRAINER

WARNING:
Ensure that there is at least 23.6” (0.6m) of clearance behind the Life Fitness
GSC Trainer and at least 12” (30 cm) on the sides.

WARNING:
The GSC Trainer is not equipped with a free-wheeling feature. Therefore, the
product cannot be stopped immediately. Do not stand or sit on the rear plastic covers.

WARNING:
Moving parts and fall hazard. To avoid serious injury wait until foot plates
come to a complete stop before getting off the unit.

The individual human power required to perform an exercise may be different than the mechanical power
displayed on the GSC Trainer.

Use caution when mounting or dismounting the GSC Trainer. Before mounting, use the moving arms to bring
the foot plate nearest to you to the lowest position. Use the stationary handlebars whenever additional stability
is required. While exercising, hold onto moving arms.

Never face backwards while using the GSC Trainer.