LifeFitness DISCOVER SE3, Operation Manual

Page: 7 / 77

6
IMPORTANT SAFETY INSTRUCTIONS
TREADMILL

WARNING:
Keep the area 6.5 ft. (2 m) by 3 ft. (0.9 m) behind the Life Fitness treadmill
clear of any obstructions, including walls, furniture, and other equipment.

WARNING:
Be sure the emergency stop lanyard is clipped to the user and in proper po-
sition on the treadmill before beginning any workout.

WARNING:
The belt centering adjustment must be performed if the belt is not between
the marks indicating the maximum allowed lateral positions. Refer to Elevation Series 95T Treadmill Assembly
Instructions.

CAUTION
:
Risk of injury to persons – to avoid injury, use extreme caution when stepping
onto or off of a moving belt. Read assembly instruction manual before using.

The product should never be left unattended when plugged in. Disconnect from the electrical outlet when not
in use, and before putting on or taking off parts. To disconnect, turn power OFF at the ON/OFF switch, then re-
move plug from electrical outlet.

Keep the power cord away from heated surfaces. Do not pull the equipment by the power cord or use the cord
as a handle. Do not run the power cord on the fl oor under or along the side of the treadmill. Refer to
Elevation
Series 95T Treadmill & PCS Treadmill Discover SE3, Discover SI, & Explore Assembly Instructions.

Handrails may be held to enhance stability as needed, but are not for continuous use.

Never mount or dismount the treadmill while the running belt is moving. Use the handrails whenever addi-
tional stability is required. In case of an emergency, such as tripping, grasp the handrails, and place the feet on
the side platforms.

Never walk or jog backwards on the treadmill.

Do not use this product in areas where aerosol spray products are being used or where oxygen is being ad-
ministered. Such substances create the danger of combustion and explosion.

The system causes immobilization of the treadmill when a pre-defi ned hard key sequence has been activated.
This sequence is currently defi ned as 3 STOP key presses followed by 3 SPEED DOWN ARROW key presses on
the activity zone keypad. To prevent false toggling of the Immobilized feature, this sequence must be done in a
5-10 second period.

In conformity with the European Union Machinery Directive 2006/42/EC, this equipment unloaded runs at
sound pressure levels below 70 dB (A) at the average operating speed of 12 km/hr. Noise emission under load
is higher than without load.
CROSS-TRAINER & FLEXSTRIDER

WARNING:
Ensure that there is at least 1 ft. (0.3 m) of clearance in front of the Life Fit-
ness Cross-Trainer and at least 2 ft. (0.6m) on the side.

WARNING:
Ensure that there is at least 2 ft. (0.6 m) of clearance behind and on each
side of the Life Fitness FlexStrider.