59
CONFIGURATION MENU: MANAGER: DEFAULTS
Setting
Default
Description
TREADMILL ONLY
Maximum Speed
14.0 mph (23 k/ph )
Set the fastest speed the treadmill can operate.
Minimum Speed
0.5 mph (0.8 k/ph )
Set the slowest speed the treadmill can operate.
Maximum % Incline
15.0
This option changes the maximum incline grade to a
value lower than 15%.
Activity Zone Speed Keys
Enabled
This option allows the user to assign belt speed to
Walk / Jog / Run values.
Stride Sensor
On
This option automatically pauses the workout if the
user steps off the belt.
Fit Test Plus
On
This option allows to enable the following Fit Tests:
Army Physical Fitness Test, Navy Physical Readiness
Test, Marines Physical Fitness Test, Air Force Fitness
Test, WFI Submax Protocol, and Physical Effi ciency
Battery.
Deceleration Rate
3
The rate at which the treadmill decelerates to the
selected speed, ranging from 1 (slowest) to 5 (fastest).
Acceleration Rate
3
The rate at which the treadmill accelerates to the
selected speed, ranging from 1 (slowest) to 5 (fastest).
Setting
Default
Description
POWERMILL ONLY
Calorie Per Hour (CPH)
Display
On (International: Off)
If this option is enabled, the MESSAGE CENTER dis-
plays the number of calories burned per hour during
the workout.
Steps Climbed Display
Off
If this setting is enabled, the total number of steps
climbed is periodically shown during a workout.
Max Acceleration Rate
3
This sets the rate at which the PowerMill Climber
accelerates to the selected speed, ranging from
one
(slowest) to fi ve (fastest).
Max Deceleration Rate
3
This sets the rate at which the PowerMill Climber
decelerates to the selected speed, ranging from one
(slowest) to fi ve (fastest).
On / Off Lvl 0 (12-19 SPM)
Warm Up Speed Level
Off
This option, if enabled, controls whether or not Level
0 may be used in program setup or during a workout.
Level 0 corresponds to intensity levels below Level 1.
On / Off Lvl 21 - 25
(160-182 SPM)
High Speed Level
On
This option controls whether or not Levels 21 though
25 may be used in program setup or during a workout
(MANUAL and SPEED INTERVAL workouts ONLY).
Minimum Speed (SPM)
20 SPM
Set the slowest speed the PowerMill can operate.
Maximum Speed (SPM)
160 SPM
Set the fastest speed the PowerMill can operate.
Summary of Contents for DISCOVER SE3
Page 58: ...57 CONFIGURATION MENU MANAGER...
Page 63: ...62 TV SETUP STB IPTV...
