37
Appendix
Safety Information
Safety precautions
Review and follow the safety instructions below.
Do not install the instrument in heavy humidity such as a greenhouse or an
incubator to avoid a danger of electric shock. If water or other material enters the
instrument, the adaptor, or power inlet, disconnect the power cord and contact a
service person. For operating environment, refer to
Specifications
(page 9).
Do not touch the main plug or power cord with wet hands.
Always ensure that the power supply input voltage matches the voltage
available in your location.
This instrument is air-cooled so its surfaces may become hot during operation.
When installing the instrument, do not place it in a confined area. Leave a space
of more than 10 cm (4 inches) around the instrument and do not place any
objects between the instrument and the wall.
Do not install the instrument on a slant or a place prone to vibrations, which
induces the risk of instrument malfunction or damage of the instrument.
Never insert any objects into the air vents of the instrument as this could result
in electrical shock, personal injury, and equipment damage.
Plug the power cord firmly into the wall outlet and AC adapter.
To avoid potential shock hazard, make sure that the power cord is properly
grounded.
Be sure to position the equipment such that it is easy to disconnect the
instrument.
Turn off the instrument before unplugging the power cord and/or moving the
instrument.
If the instrument is broken or dropped, disconnect the power cord and contact
a service person. Do not disassemble the instrument. Disassembling the
instrument invalidates its warranty.
Use only authorized accessories (adaptor, power cord, and USB drive).
For operating environment, see
Specifications
(page 9).
If the instrument emits smoke, disconnect the power cord from the wall outlet
and contact a service person.
Continued on next page
