Life technologies Invitrogen Tali, User Manual

Page: 36 / 42

36
Clean the Tali ™ Image-Based Cytometer
Introduction
We recommend that the Tali
™
Image-Based Cytometer be cleaned periodically to
prevent the buildup of dust and dirt that might reduce its performance and cause
contamination.
Important

To avoid electrical shock, always turn off the Tali
™
Image-Based Cytometer and
unplug the power cord before cleaning or decontaminating the instrument.

Using a cleaning or decontaminating method other than that specified by the
manufacturer may result in damage to the instrument.

All biological samples and materials that come into contact with them have the
potential to transmit infectious diseases and are considered biohazardous.
Follow all applicable local, state/provincial, and/or national regulations. Wear
appropriate protective eyewear, clothing, and gloves.
Clean the
touch screen

Wipe the touch screen of the Tali ™ Image-Based Cytometer using a soft, lint-free
cloth moistened with an LCD cleaning solution. Do not apply excessive force
during cleaning. Wipe the touch screen dry immediately after cleaning.

Ensure that the cleaning solution does not enter the power button, the power
inlet, the slide port, or the USB ports.

Never pour or spray any liquids directly on the instrument to avoid electrical
shock when the instrument is plugged in.

Do not use abrasive cleaning solutions or material to prevent the touch screen
from getting scratched.
Clean the
instrument case

Wipe the instrument case of the Tali
™
Image-Based Cytometer using a soft, lint-
free cloth moistened with distilled water. Wipe the instrument dry immediately
after cleaning.

Ensure that water or other cleaning solutions do not enter the power button, the
power inlet, the slide port, or the USB ports.

Never pour or spray any liquids directly on the instrument to avoid electrical
shock when the instrument is plugged in.
Decontaminating
the instrument

Wipe the instrument case of the Tali
™
Image-Based Cytometer using a soft, lint-
free cloth moistened with 70% alcohol. Wipe the instrument dry immediately after
cleaning.

Avoid using a bleach solution, because it may leave a residue of bleach crystals on
the instrument. Avoid cleaning the touch screen.

Ensure that water or other cleaning solutions do not enter the power button, the
power inlet, the slide port, or the USB ports.

Never pour or spray any liquids directly on the instrument to avoid electrical
shock when the instrument is plugged in.