58
206-4350
Cloning Procedures (Cont.)
Import Clone File Procedure
1. Turn ON the Target TV.
2. The next step depends on whether the First Use Wizard appears on the screen when you turn
ON the TV:
• If the wizard is displayed, you can complete the import procedure via the EZ-Manager Wizard,
as indicated above (see “Before You Begin”). However, to continue with this procedure and
access the “Import Clone File” option from the TV menus, exit the First Use Wizard. Then,
continue with step 3.
• If the wizard is not displayed, go directly to step 3.
3. If applicable (see also “Before You Begin” above), make sure to set the appropriate TV Zone #
and/or Wi-Fi Zone # in the Target TV at this time.
Note: In order for the proper TV Zone and/or Wi-Fi Zone profile data to be applied,
the appropriate TV Zone # and/or Wi-Fi Zone # must be set in the Target TV BEFORE
importing is initiated.
4. Insert the USB memory device with the Clone/Configuration (.tlx) file into either of the USB
ports on the Target TV.
5. Press the button on the Installer Remote to display the TV setup menus (TV is in Pass-
through Mode) or the Function Menu (TV is already in FTG Mode).
6. (TV in Pass-through Mode only) From the Quick Settings Menu displayed at the left of the
screen, select the
All Settings
menu icon and press the Wheel (
OK
) button
to access the
advanced TV setup menus.
7. Use the arrow navigation keys to select/highlight either the
General
menu icon from the TV
setup menus or the
Safety
menu icon from the Function Menu. Then, press the number “
7
” key
a total of seven times to access the TV Manager.
Note:
Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
X
TV MANAGER
USB 1:
Device Name
Select the desired option below.
USB DEVICE
DIAGNOSTICS: ON
Ez Download
Data Cloning
Image Download
Icon Download
Video Download
Software Update
(Continued on next page)
