LG Pro Centric 55ET960H Setup Manual Download Page 46

Page: 46 / 115

206-4350

Installer Menu (Cont.)

028 - CH. OVERIDE (Channel Override)

This item either allows or restricts tuning of channels that are NOT

in the PTC Channel Map.

If set to 1, end users can tune channels

that are not in the PTC Channel Map by direct keypad entry. If

set to 0, users are restricted to only the channels that are in the

PTC Channel Map. In the case of CPU-CTV Mode, there are no

channels in the PTC Channel Map; therefore, direct keypad entry

is not available. Also, when this item is set to 0, the PTC Channel

Map (PTC-CTV Mode)/CPU channel lineup (CPU-CTV Mode)

is locked, and user access to channel settings in the TV setup

menus is restricted.

Note:

This item is not applicable when the TV is in FTG Mode or

Application Tuning Mode.

029 - REMAP AUX INPS

Set to 1 to remap the PTC’s direct tune channels for Aux inputs

from 13x to 9x. This allows 2-digit only tuning systems (i.e.,

legacy On Command Video™) to direct tune Aux inputs. See also

Reference section, “TV Aux Input Configuration.”

030 - ACK MASK

MPI Communication Parameter. When set to 1, enables the ACK

feature of MPI.

031 - POLL RATE

MPI Communication Parameter. Selects the poll rate for MPI. Step

size of 16 ms. Changing from default may affect communication

via MPI.

032 - TIMING PULSE

MPI Communication Parameter. Sets the baud rate for MPI. Step

size of 4.3 uS. Changing from default may affect communication

via MPI.

035 - HDMI1 ENABLE

Set to 1 to enable HDMI 1 input in DTV Mode. Set to 2 to enable

HDMI 1 input in PC Mode. Set to 0 to disable display panel HDMI

1 input.

039 - REAR AUX EN. (Rear Aux Enable)

Set to 1 to enable display panel rear Aux (AV) input. Set to 0 to

disable display panel rear Aux (AV) input.

041 - SIMPLINK EN

Set to 0 to disable the SIMPLINK feature. Set to 1 to enable

SIMPLINK functionality (does not enable remote control access to

the SIMPLINK Menu).

Note:

When both this item

and

item 042 AUTO INPUTS are

enabled in the Installer Menu, HDMI inputs will be detected by

SIMPLINK, but the Auto Input(s) Sensing Feature will not function.

042 - AUTO INPUTS

Determines the Aux inputs for which auto-sensing is enabled. Set

to 0 to disable auto-sensing for all available inputs. Set to 255 to

enable auto-sensing for all available inputs. For information on

options for individual input settings, see Reference section, “Auto

Input(s) Sensing Feature.”

Note:

In order for auto-sensing to be enabled for an input, that

input must also be enabled in the Installer Menu. For example, to

enable auto-sensing for HDMI 1, item 035 HDMI1 ENABLE must

also be set to 1 or 2. Also, see note above regarding TV operation

when both this item and item 041 SIMPLINK EN are enabled.

046 - STRT AUX SRCE (Start Aux Source)

Sets the starting Aux source. When turned ON, the TV will tune to

starting Aux source if item 004 STRT CHANNEL is set to 0.
1 = AV

3 = HDMI 1

5 = HDMI 2

7 = HDMI 3

255 = Last Aux

Note:

In order for an Aux input to be selected as the starting Aux

source, the input also must be enabled in the Installer Menu.

Note:

This item is not available in the Installer Menu unless item

004 STRT CHANNEL is set to 0.

047 - AUX STATUS

Controls the MPI status channel response for Aux sources. Set to

1 for the Aux source to be reported as its channel number. Set to

0 for the Aux source to be reported as channel 0. See Reference

section, “TV Aux Input Configuration,” for Direct Access channel

numbers.

049 - DIS. AUDIO M. (Disable Audio Menu)

Determines the availability of the Sound Out (Audio) Menu in the

TV menus. Also determines the default Audio Mode when TV is

turned ON. See the table below and set as required.

Value

Sound Out

Menu Status

Default Audio Mode at TV

Turn ON

0 (default)

Enabled

TV Speaker

Disabled

TV Speaker

Enabled

External Speaker (Optical)

Disabled

External Speaker (Optical)

Enabled

LG Sound Sync (Optical)

Disabled

LG Sound Sync (Optical)

Enabled

LG Sound Sync (Wireless/BT)

Disabled

LG Sound Sync (Wireless/BT)

Enabled

TV S Audio Out (Optical)

Disabled

TV S Audio Out (Optical)

Enabled

External Speaker (HDMI ARC)

Disabled

External Speaker (HDMI ARC)

Summary of Contents for Pro Centric 55ET960H




















































































































Search results

Summary of Contents for Pro Centric 55ET960H

Reviews:

Related manuals for Pro Centric 55ET960H

Brands by name

Popular brands

LG Pro Centric 55ET960H, Setup Manual

Search results

Summary of Contents for Pro Centric 55ET960H

Reviews:

Related manuals for Pro Centric 55ET960H

Brands by name

Popular brands