manualshive.com logo in svg

LG PREMTB100, Owners & Installation Manual, Page: 39 / 82

Share
Download
LG PREMTB100 Owners & Installation Manual Download Page 39

77

FUNCTION SETTING

ENGLISH

76

FUNCTION SETTING

Home Leave Set Temperature Setting

Home Leave Set Temperature function is used in Dual Setpoint Control mode.

When customer operate as home leave mode, this setting temperature value will be applied.

OK

NOTE

!

Home Leave Set Temperature function can only be used in a dual setpoint control mode.

Comfort cooling setting

It is the function to set the outdoor unit Comfort saving operation value.

• You can set the following values using [<,>(left/right)] button.

ODU Refrigerant Noise Reduction setting

It is the function to set the outdoor unit’s refrigerant noise reduction function.

• You can use [<,>(left/right)] button to set the following setting values as follows.

Value

Step 1

Step 2

Step 3

NOTE

!

The Comfort cooling function does not work in the group control.

Comfort cooling setting function is only available in some products.

NOTE

!

The ODU Refrigerant Noise Reduction function can be set only when the installer setting’s
outdoor unit function M/S setting is set to “Master”.

ODU Refrigerant Noise Reduction function is only available in some products.

Value

Description

Step 0

Not use

Step 1

Outdoor unit noise mode 1

Step 2

Outdoor unit noise mode 2

Summary of Contents for PREMTB100



















































































Reviews:

No comments