manualshive.com logo in svg

LG CodePlus PIVD100R, Installation & Setup Manual, Page: 7 / 69

Share
Download
LG CodePlus PIVD100R Installation & Setup Manual Download Page 7

7

206-4202

PIVD100R Product Description

The LG CodePlus™ PIVD100R Pro:Idiom 

®

 Video Distribution Transcoder System provides a 

flexible 8- to 16-program HDTV solution for system providers who provide satellite delivered 

content to commercial facilities (hotels, hospitals, etc.). The PIVD100R incorporates eight 

100BaseTX Ethernet interface X-Ports that connect up to eight satellite set-top boxes (STBs) 

from either DIRECTV 

®

 or DISH Network 

®

 satellite service.

Features

•  Two output options: RF or IP (concurrent operation not supported)

 

− RF output: The PIVD100R generates four contiguous 256-QAM cable channels, with 

up to two DIRECTV or three DISH Network program streams multiplexed on each  

channel. This capability provides up to 8 HD programs of DIRECTV content or up to  

12 HD programs of DISH Network content.

 

− IP output: The PIVD100R provides up to 8 HD programs of DIRECTV content or up  

to 16 HD programs of DISH Network content.

•  Transcodes satellite content for distribution
•  Built-in Pro:Idiom content protection
•  Supports Pro:Idiom encryption key maintenance
•  Transcoded output supports Closed Captions and V-Chip (Parental Control) 

(if included in the signal source)

•  Remote management capability over Ethernet via either graphical user interface (GUI) or 

command line interface

•  Unit does not require local monitor, keyboard, or mouse connection
•  Small, lightweight chassis
•  19-inch rack-mountable
•  1U height profile to minimize rack space usage

The PIVD100R converts satellite MPEG-4 HD programming to an encrypted, encoded  

transport stream. A Pro:Idiom-compatible television is required to view premium HD content, 

and a proper session ID must be set at the TV in order for Pro:Idiom decryption to be enabled. 

LG’s Pay-Per-View (PPV) partners can set up this session through their interface. LG’s Free-

To-Guest (FTG) Mode of operation also enables Pro:Idiom decryption.
Multiple PIVD100R units may be combined in the head end to deliver an entire channel  

lineup of HD programming.

Note: Design and specifications subject to change without prior notice.

Summary of Contents for CodePlus PIVD100R






































































Reviews:

No comments