27
206-4202
(Continued from previous page)
2. If you enabled the STB Software Update in step 1, complete each of the date and time
fields to set the parameters for the STB update. Click on the down arrow at the right of
each field (Year, Month, Day, Hour, Minute) to select the appropriate value from the drop-
down list of options.
Note:
It is recommended that you schedule the 30-minute STB software update window
during a time when the STB is not likely to be in use.
3. If you wish to apply the new enabled/disabled status, and if applicable, the data and time
data, to all of the STBs connected to this PIVD100R, click the “Apply to all other STBs”
checkbox.
4. When you have completed the fields as required, click on the
Set
button at the bottom of the
STB Software Update section to confirm your settings.
If you successfully set the STB Software Update status/parameters, the system will display
at the bottom of the STB Information display.
Reset the STB
1. Click on the
Reset
button in the Reset STB section of the STB Menu screen.
2. The system will display a pop-up window prompting for confirmation. Either:
• Click
OK
to proceed.
• Click
Cancel
to return to the STB Menu screen without resetting the STB.
If you opt to proceed, the system will initiate the reset immediately. Note that an STB reset
may take up to 10 minutes. After reset, the STB resumes normal operation.
PIVD100R System Setup Options
The System Setup screen enables you to view and/or modify the system configuration. To
access the System Setup screen, click on
System Setup
in the options panel at the left of the
screen.
On the left side of the System Setup screen, the System Information section provides important
information about the current configuration of the PIVD100R, including the unit serial number,
software version, hardware ID (firmware version), Control Port MAC and IP addresses, and
output configuration. On the right side of the screen, several menu options are available, as
described in the following subsections.
Configuration Options via GUI (Cont.)