60
206-4202
View the Pro:Idiom Key Checksum
At the
P:I Command >
prompt, type
pchk
and press
Enter
.
The Pro:Idiom key checksum is a 10 digit number that identifies the Pro:Idiom key file installed
on the PIVD100R, for example:
Pro:Idiom key checksum = 1521204805
Change the Pro:Idiom Password
1. At the
P:I Command >
prompt, type
pip
and press
Enter
.
2. At the
Enter new PI password:
prompt, type a new Pro:Idiom password and press
Enter
.
The new password will take effect immediately.
Exit the Pro:Idiom Key Menu
At the
P:I Command >
prompt, type
exit
and press
Enter
to exit the Pro:Idiom Menu and
return to the PIVD100R Main Menu
Command >
prompt.
Reset the System
Note:
This option is also available from the Setup Menu.
1. If not already logged in, log in to the PIVD100R as described on page 37.
2. At the
Command >
prompt, type
reset
and press
Enter
.
This will initiate a reset of the PIVD100R and may also initiate a reset of one or more STBs, if
required. Once the PIVD100R is reset (may take up to 90 seconds), it may then take up to 10
minutes for the PIVD100R to reestablish communication with the STBs. After the system reset,
the PIVD100R resumes normal operation.
Exit the Current Session
At the
Command >
prompt, type
exit
and press
Enter
to end the current session.
Configuration Options via Command Line (Cont.)