56
206-4202
Change the Login Password
1. At the
Setup Command >
prompt, type
pwd
and press
Enter
.
The system prompts for the current admin user password:
Changing password for admin
Old password:
2. Type the current password and press
Enter
. The system will then prompt you to type and
retype the new password:
New password:
Retype password:
3. Type and then retype the new password at the prompts. Press
Enter
after each entry.
Once you complete the Password fields successfully, the system displays confirmation:
Password for admin changed by admin.
Exit the Setup Menu
At the
Setup Command >
prompt, type
exit
and press
Enter
to exit the Setup Menu and
return to the PIVD100R Main Menu
Command >
prompt.
Reset the System
This command is also available from the PIVD100R Main Menu.
At the
Setup Command >
prompt, type
reset
and press
Enter
. This will initiate a reset of the
PIVD100R and may also initiate a reset of one or more STBs, if required. Once the PIVD100R
is reset (may take up to 90 seconds), it may then take up to 10 minutes for the PIVD100R
to reestablish communication with the STBs. After the system reset, the PIVD100R resumes
normal operation.
Update Menu Commands
The following subsections describe how to access and use the Update Menu commands.
Access the Update Menu
1. Log in to the PIVD100R as described on page 37.
2. At the
Command >
prompt, type
update
and press
Enter
.
3. At the
Update Command >
prompt, either:
• Press
Enter
to display the Update Menu (see example on following page).
• Type the desired command and press
Enter
.
Note:
You can always press
Enter
at the
Update Command >
prompt to display the
Update Menu.
Configuration Options via Command Line (Cont.)