LG 50PC1DR - - 50" Plasma TV Training Manual Download Page 81

Page: 81 / 138

SOFTWARE UPDATES

Plasma Training

Software Updates

UPDATE INSTUCTIONS - EXPERT METHOD

Expert Mode will allow any firmware version on the card to be loaded into the TV. This allows an older
version of the firmware to be loaded when needed.

1) Copy the Firmware update to the memory card. The firmware file will have the file extension

“.epk”. Only copy the firmware update for your model TV.

2) Turn the TV on and insert the memory card into the TV.

3) If a menu displays on the screen, exit out of that screen. Press the MENU button and highlight

(scroll down to) the Option menu. Press the MARK button 7 times and the expert mode screen
will appear.

4) Use the arrow keys to select the firmware update to install. Press OK and follow the prompts.

5) When the update is complete, press ENTER to restart the TV. After restarting, the TV is ready to

use.

TV Software Upgrade For Experts

[Current TV Version Information]

Main Software : 02.06.01(04/01/05)

File System : 07.01

EDBMS : 01.0c

The following software files are found in the memory card.
Select the file you want to download to this TV.
Or, Press EXIT to cancel the upgrade.

APP: 02.04.01 FS VER: 07.01 DB VER: 01.0c

BOOTROM.EPK

APP_50PY2DR-UA_0301.EPK

APP_50PY2DR-UA_0225.EPK

APP_50PY2DR-UA_0124.EPK

APP_50PY2DR-UA_0401.EPK

TV Software Upgrade For Experts

[Current TV Version Information]

Main Software : 02.06.01(04/01/05)

File System : 07.01

EDBMS : 01.0c

The following software files are found in the memory card.
Select the file you want to download to this TV.
Or, Press EXIT to cancel the upgrade.

APP: 02.04.01 FS VER: 07.01 DB VER: 01.0c

BOOTROM.EPK

APP_50PY2DR-UA_0301.EPK

APP_50PY2DR-UA_0225.EPK

APP_50PY2DR-UA_0124.EPK

APP_50PY2DR-UA_0401.EPK

Summary of Contents for 50PC1DR - - 50" Plasma TV










































































































































Search results

Summary of Contents for 50PC1DR - - 50" Plasma TV

Reviews:

Related manuals for 50PC1DR - - 50" Plasma TV

Brands by name

Popular brands

LG 50PC1DR - - 50" Plasma TV, Training Manual

Search results

Summary of Contents for 50PC1DR - - 50" Plasma TV

Reviews:

Related manuals for 50PC1DR - - 50" Plasma TV

Brands by name

Popular brands