LG 50PC1DR - - 50" Plasma TV, Training Manual

Page: 14 / 138

Plasma Training
14
Installation
INSTALLATION
GENERAL MOUNTING
The chart below gives screw sizes needed to mount our plasma units to most wall mounts. The
design of the mount may require longer or shorter screws than the length indicated below. Lengh is
in the far right column. Use 25mm screws for the 42” and 50” plasma models and 15mm for the 60”
models. This is subject to change without notice. Some units require spacers between the mount and
the unit, this also varies by cabinet design.
15 4.2 0.4 0.491 4.13 4.019 4.48 0.115 0.8 M 5.00
25 4.2 0.4 0.491 4.13 4.019 4.48 0.115 0.8 M 5.00
mm mm h3 H1 d3 D1 d2=D2 r P d = D
Length
Drill
Diameter
Thread
Height
Minor
Diameter
Pitch
Diameter
Root
Radius Pitch
Nominal
Diameter
15 4.2 0.4 0.491 4.13 4.019 4.48 0.115 0.8 M 5.00
25 4.2 0.4 0.491 4.13 4.019 4.48 0.115 0.8 M 5.00
mm mm h3 H1 d3 D1 d2=D2 r P d = D
Length
Drill
Diameter
Thread
Height
Minor
Diameter
Pitch
Diameter
Root
Radius Pitch
Nominal
Diameter