manualshive.com logo in svg

LG-Nortel ARIA SOHO, Feature Description And Operation Manual

Share
Download
LG-Nortel ARIA SOHO Feature Description And Operation Manual Download Page 57

ARIA SOHO Version 1   

Issue 0.2 

Feature Description and Operation Manual 

June, 2006 

 

2.4.12 Headset 

Description 

An industry standard Headset can be connected to a Station instead of a Handset. The Station can be 
programmed for Headset operation in place of the Speakerphone mode of operation. 

 

Operation 

To change the Station mode between Speakerphone or Headset, perform the following Steps: 

1. 

Press the [TRANS/PGM button. 

2. 

Dial code 75. 

3. 

The Station Answer mode should be displayed on the LCD screen of the phone. 

4. 

Dial code 1 (Speaker mode) or 0 (Headset mode). 

 

To change the Headset Ring mode, perform the following: 

1. 

Press the [TRANS/PGM] button. 

2. 

Dial code 76 

3. 

The Station Answer mode should be displayed on the LCD screen of the phone. 

4. 

Dial the applicable code 

 

1 =

 Speaker Ring Only 

 

2 =

 Headset Only 

 

3 =

 Both 

 

Condition 

 

The intercom signaling mode (HF/TN/PV – [TRANS/PGM] + 1 + 2) can be set in the Headset 
and Speakerphone mode. 

 

In Headset mode, the User can select an incoming ring mode to hear ringing with the Speaker, 
Headset, or Both by Admin Programming. 

 

The Station will receive paging with the Station Speaker. 

 

To Answer an intercom call in Tone mode, the User should press the [MON] button. 

 

When an intercom call is received in Privacy mode, the Station will be muted automatically; the 
User should press the [MUTE] button to answer the intercom call. 

 

Admin Programming 

Headset Ring Mode (PGM 111 – FLEX10) 

Speakerphone/Headset (PGM 111 – FLEX11) 

 

 

 

 

 

 

 

 

 

51 

Summary of Contents for ARIA SOHO
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands