manualshive.com logo in svg

LG-Nortel ARIA SOHO, Feature Description And Operation Manual

Share
Download
LG-Nortel ARIA SOHO Feature Description And Operation Manual Download Page 115

ARIA SOHO Version 1   

Issue 0.2 

Feature Description and Operation Manual 

June, 2006 

 

 

Reference 

A. 

Refer to ARIA SOHO Hardware Description and Installation Manual, Message Wait/Callback Return 
code (PGM 106 – FLEX17) 

 

Admin Programming 

VMIB Message Type (PGM 111 – FLEX17) 

VMIB Access (PGM 113 – FLEX2) 

VMIB Message Retrieve Password (PGM 113 – FLEX8) 

VMIB Message Retrieve Date/Tome (PGM 113 – FLEX9) 

VMIB Forward No Answer Timer (PGM 181 – FLEX1) 

VMIB User Record Timer (PGM 181 – FLEX3) 

VMIB Valid User Message Timer (PGM 181 – FLEX4) 

VMIB Rewind Message Timer (PGM 181 – FLEX17) 

 

 

2.11.5 VMIB Announcement for Auto Attendant 

Description 

Incoming CO calls may be answered by VMIB and rerouted to another Station with CCR when the Attendant does 
not answer the call before the No Answer timer expires or the Attendant is busy. 

 

Operation 

When an incoming call is received at the Attendant Station with the Auto Attendant feature enabled, and there is 
no answer, the following will occur: 

1. 

On No Answer, the No Answer timer is initiated. 

2. 

When timer expires, the call is forwarded to the Auto Attendant; the caller will hear a VMIB 
message and will be able to reroute to another User using CCR. 

 

Condition 

 

No available for recall and transferred calls. 

 

CO ringing should be assigned to only the Attendant. 

 

Admin Programming 

Auto Attendant VMIB Announce Number (PGM 165) 

 

 

 

 

 

 

 

109 

Summary of Contents for ARIA SOHO
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands