ARIA SOHO Version 1
Issue 0.2
Feature Description and Operation Manual
June, 2006
Condition
The Flash command is not activated on ISDN CO Lines.
A Station that isn’t permitted to access CO Lines cannot initiate a Flash.
During a Flash, the LED of the applicable CO Line will flash.
Admin Programming
Refer to ARIA SOHO Hardware Description and installation Manual, flash Command to CO Line Code
(PGM 106 – FLEX11)
Flash Type (PGM 141 – FLEX7)
CO Flash timer (PGM 142 – FLEX12)
SLT Hook-Switch Bounce timer (PGM 182 – FLEX1)
SLT Maximum Hook-Switch Flash timer (PGM 182 – FLEX2)
SLT minimum Hook-Switch Flash timer (PGM182 – FLEX3)
2.4.11 Flexible Buttons
Description
Flexible buttons are customized by Admin or Station Programming. Buttons could be programmed with the
following features:
CO Line—Automatically accesses the assigned line (User Programmable).
DSS/BLF—Automatically indicates the assigned Station and provides BLF for off-hook and
DND (User Programmable).
Flexible Numbering Code—Any feature with a dialing code (Paging, Account Code, Call Park,
etc.) can be assigned to a flexible button (User Programmable).
Speed Dial—Automatically dials Speed number (System, Station, Saved Number Redial, Last
number Redial) (User Programmable).
Group Access—Hunt Group Pilot number (User Programmable).
Pool Group Access—Some or all outside lines can be grouped; pressing this button accesses
the highest numbered unused CO Line in that group (User Programmable).
Loop—Used to answer a transferred call on a line for which the Station does not have a button
assigned (User Programmable).
Station Assignment—Allows assignment of Stations and complete flexibility within the System
numbering plan. A Station can be assigned a number (100-399).
4/8 Button—Feature code assign (refer to Table).
FEATURE BUTTON
FEATURE CODE
Conference 91
Call Back
92
DND/Forward 93
Flash 94
Mute 95
MON 96
Redial 97
Telephone Number—Automatically dials an outside Telephone Number (ex., LDP-7224 3-soft
key).
49
