manualshive.com logo in svg

LG-Nortel ARIA SOHO, Feature Description And Operation Manual

Share
Download
LG-Nortel ARIA SOHO Feature Description And Operation Manual Download Page 105

ARIA SOHO Version 1   

Issue 0.2 

Feature Description and Operation Manual 

June, 2006 

 

2.10.2 Door Phone 

Description 

A convenient Intercom box (LDP-DPB) can be connected to the System for receiving Page announcements, 
Intercom calls, and signaling assigned Stations on the System. Any combination of DKTUs or Intercom boxes can 
be arranged in the System. Figure 2.10.1 describes the operation of Door Phone. 

 

ICM BOX 

(Door Phone) 

Reception

Door 

Call Button 

Reception Call

Door Open(2.10.1)

Conversation

①

 

②

 

 

 

 

 

 

 

 

 

FIGURE 2.10.1 DOOR PHONE 

 

Operation 

To call an Intercom box, perform the following Steps: 

1. 

Lift the Handset or press [MON] button. 

2. 

Dial the Station number of the Intercom box or press the flexible button for the Intercom box. 

3. 

After hearing the warning tone, announce the call. 

 

To place a call from an Intercom box, perform the following: 

1. 

Press the [CALL] button and the assigned Station will ring. 

 

To answer an Intercom call at a Station assigned for Intercom box signals, perform the following: 

DKTU 

1. 

Press the Intercom flexible button or Intercom box. 

 

SLT 

1. Go 

off-hook 

 

To place an Intercom box in DND mode (refer to Ref. A), perform the following: 

1. 

Press the [DND] button. 

 

 
 
 
 
 
 
 

 

99 

Summary of Contents for ARIA SOHO
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands