Lexmark XC6100 Series User Manual Download

Page: 133 / 177

Print crooked or skewed

)

ABCDE

Action

Yes

Step 1

Move the paper guides in the tray to the correct position for the
paper loaded.

Resend the print job.

Is the print still crooked or skewed?

Go to step 2.

The problem is
solved.

Step 2

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Resend the print job.

Is the print still crooked or skewed?

Go to step 3.

The problem is
solved.

Step 3

Check if you are printing on a supported paper.

Resend the print job.

Is the print still crooked or skewed?

Contact

customer

support

The problem is
solved.

Repeating defects

)

Troubleshooting

133

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands