Lexmark XC6100 Series User Manual Download

Page: 50 / 177

Scanning

Scanning to an FTP server

Load the original document into the ADF tray or on the scanner glass.

From the home screen, touch

FTP

, and then enter the needed information.

If necessary, conﬁgure other FTP settings.

Send the FTP job.

Creating an FTP shortcut

From the home screen, touch

FTP

Enter the FTP server address, and then touch

Enter a shortcut name.

Apply the changes.

Scanning to a ﬂash drive

Load an original document into the ADF tray or on the scanner glass.

Insert the ﬂash drive into the USB port.

Select the destination folder, and then touch

Scan to USB

If necessary, adjust the scan settings.

Send the scan job.

Warning—Potential Damage:

Do not touch the printer or the ﬂash drive in the area shown while actively

printing, reading, or writing from the memory device. Loss of data or a malfunction can occur.

Scanning

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands