Lexmark XC6100 Series User Manual Download

Page: 95 / 177

•

Make sure that your ﬁngers are not under the printer when you set it down.

•

Make sure that there is adequate clearance around the printer.

Note:

Damage to the printer caused by improper moving is not covered by the printer warranty.

Shipping the printer

For shipping instructions, go to

http://support.lexmark.com

or contact customer support.

Saving energy and paper

Setting up power saver modes

Eco

‑

Mode

From the home screen, touch

Settings

Device

Power Management

Eco

‑

Mode

Select a setting.

Sleep mode

From the home screen, touch

Settings

Device

Power Management

Timeouts

Sleep Mode

Enter the number of minutes the printer stays idle before it enters Sleep mode.

Hibernate mode

From the home screen, touch

Settings

Device

Power Management

Timeouts

Hibernate Timeout

Select the amount of time before the printer enters hibernate mode.

Notes:

•

Make sure to wake the printer from hibernate mode before sending a print job.

•

The Embedded Web Server is disabled when the printer is in hibernate mode.

Adjusting the brightness of printer display

From the homes screen, touch

Settings

Preferences

Screen Brightness

Adjust the setting.

Conserving supplies

•

Print on both sides of the paper.

Note:

Two-sided printing is the default setting in the print driver.

•

Print multiple pages on a single sheet of paper.

•

Use the preview feature to see how the document looks like before printing it.

•

Print one copy of the document to check its content and format for accuracy.

Maintaining the printer

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands