Lexmark XC6100 Series User Manual Download

Page: 129 / 177

Note:

If horizontal dark lines keep appearing on your prints, then see the “Repeating defects” topic.

Action

Yes

Step 1

Depending on your operating system, specify the paper type
and weight from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the settings match the paper loaded in
the tray.

•

You can also change the settings on the printer control
panel.

Resend the print job.

Do horizontal white lines still appear on prints?

Go to step 2.

The problem is
solved.

Step 2

Load the speciﬁed tray or feeder with the recommended paper
type.

Resend the print job.

Do horizontal white lines still appear on prints?

Go to step 3.

The problem is
solved.

Step 3

Remove, and then reinstall the imaging unit or imaging kit.

Warning—Potential Damage:

Do not expose the imaging unit

or imaging kit to direct light for more than 10 minutes.
Extended exposure to light can cause print quality problems.

Warning—Potential Damage:

To avoid damage, do not touch

the underside of the imaging unit or imaging kit.

Resend the print job.

Do horizontal white lines still appear on prints?

Go to step 4.

The problem is
solved.

Step 4

Replace the imaging unit or imaging kit, and then resend the print
job.

Do horizontal white lines still appear on prints?

Contact

customer

support

The problem is
solved.

Incorrect margins

A B C D

Troubleshooting

129

Summary of Contents for XC6100 Series


















































































































































































Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands

Lexmark XC6100 Series, User Manual

Search results

Summary of Contents for XC6100 Series

Reviews:

Related manuals for XC6100 Series

Brands by name

Popular brands