Lexmark XC6100 Series User Manual Download | Manualshive

Page: 6 / 177

background image

Safety information

Conventions

Note

: A

note

identiﬁes information that could help you.

Warning

: A

warning

identiﬁes something that could damage the product hardware or software.

CAUTION

: A

caution

indicates a potentially hazardous situation that could injure you.

Different types of caution statements include:

CAUTION—POTENTIAL INJURY:

Indicates a risk of injury.

CAUTION—SHOCK HAZARD:

Indicates a risk of electrical shock.

CAUTION—HOT SURFACE:

Indicates a risk of burn if touched.

CAUTION—TIPPING HAZARD:

Indicates a crush hazard.

CAUTION—PINCH HAZARD:

Indicates a risk of being caught between moving parts.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord to

an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, use only the power cord

provided with this product or the manufacturer's authorized replacement.

CAUTION—POTENTIAL INJURY:

Do not use this product with extension cords, multioutlet power strips,

multioutlet extenders, or UPS devices. The power capacity of these types of accessories can be easily
overloaded by a laser printer and may result in a risk of ﬁre, property damage, or poor printer
performance.

CAUTION—POTENTIAL INJURY:

Only a Lexmark Inline Surge Protector that is properly connected

between the printer and the power cord provided with the printer may be used with this product. The
use of non-Lexmark surge protection devices may result in a risk of ﬁre, property damage, or poor
printer performance.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not place or use this product near

water or wet locations.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, do not set up this product or make

any electrical or cabling connections, such as the power cord, fax feature, or telephone, during a
lightning storm.

CAUTION—POTENTIAL INJURY:

Do not cut, twist, bind, crush, or place heavy objects on the power

cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between objects
such as furniture and walls. If any of these things happen, a risk of ﬁre or electrical shock results. Inspect
the power cord regularly for signs of such problems. Remove the power cord from the electrical outlet
before inspecting it.

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, make sure that all external

connections (such as Ethernet and telephone system connections) are properly installed in their marked
plug-in ports.

Safety information

6

«
...
4
5
6
7
8
...
»

Summary of Contents for XC6100 Series


















































































































































































Reviews:

No comments

Related manuals for XC6100 Series

Brand: Oce Pages: 192

Brand: Oce Pages: 22

Brand: Oce Pages: 41

Brand: Oce Pages: 28

Brand: Oce Pages: 6

Brand: QMS Pages: 104

Brand: Oce Pages: 386

Brand: Oce Pages: 2

Brand: Oce Pages: 27

Brand: Oce Pages: 324

Brand: TE Connectivity Pages: 2

Brand: TE Connectivity Pages: 2

Brand: Oce Pages: 340

Brand: Muratec Pages: 112

Brand: idp Pages: 104

Daisy Wheel 410

Brand: Radio Shack Pages: 140

ThermalTronix TT-1260S-UTCM

Brand: Intellisystem Pages: 18

Brand: Pantum Pages: 164

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands