Lexmark CX331 User Manual Download Page 182

Page: 182 / 204

Poor copy quality

Action

Yes

Step 1

Using a damp, soft, lint-free cloth, wipe the scanner glass and
the ADF glass.

Make sure that the document or photo is loaded facedown on
the upper-left corner of the scanner glass.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Go to step 2.

Step 2

Check the quality of the original document or photo.

Adjust the scan quality settings.

Copy the document or photo.

Is the copy quality satisfactory?

The problem is
solved.

Contact

customer

support

Vertical dark streaks on output when scanning from the ADF

ABCDE
ABCDE
ABCDE

Leading edge

Trailing edge

Action

Yes

Open the scanner cover.

Using a damp, soft, lint

‑

free cloth, wipe the ADF glass and the

ADF glass pad.

Close the scanner cover.

Scan the document.

Do vertical streaks appear on scanned documents?

Contact

customer

support

The problem is
solved.

Scanner does not close

Action

Yes

Remove obstructions that keep the scanner cover open.

Did the scanner cover close correctly?

The problem is
solved.

Contact

customer

support

Troubleshoot a problem

182

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands