Lexmark CX331 User Manual Download Page 157

Page: 157 / 204

Action

Yes

Step 3

Turn off Color Saver.

From the control panel, navigate to:

Settings

Print

Quality

Color Saver

Print the document.

Is the print light?

Go to step 4.

The problem is
solved.

Step 4

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Is the print light?

Go to step 5.

The problem is
solved.

Step 5

Check if paper has texture or rough ﬁnishes.

Are you printing on textured or rough paper?

Go to step 6.

Go to step 7.

Step 6

Replace textured or rough paper with plain paper.

Print the document.

Is the print light?

Go to step 7.

The problem is
solved.

Step 7

Load paper from a fresh package.

Note:

Paper absorbs moisture due to high humidity. Store

paper in its original wrapper until you are ready to use it.

Print the document.

Is the print light?

Go to step 8.

The problem is
solved.

Troubleshoot a problem

157

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands