Lexmark CX331 User Manual Download Page 186 | Manualshive

Page: 186 / 204

background image

Notices

Product information

Product name:

Lexmark CX331adwe; Lexmark MC3224dwe, Lexmark MC3224adwe; Lexmark MC3326adwe MFPs

Machine type:

3500

Model(s):

285, 485, 685

Edition notice

July 2019

The following paragraph does not apply to any country where such provisions are inconsistent with local
law:

LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY

KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of
express or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made
to the information herein; these changes will be incorporated in later editions. Improvements or changes in the
products or the programs described may be made at any time.

References in this publication to products, programs, or services do not imply that the manufacturer intends to
make these available in all countries in which it operates. Any reference to a product, program, or service is
not intended to state or imply that only that product, program, or service may be used. Any functionally
equivalent product, program, or service that does not infringe any existing intellectual property right may be
used instead. Evaluation and veriﬁcation of operation in conjunction with other products, programs, or services,
except those expressly designated by the manufacturer, are the user’s responsibility.

For Lexmark technical support, go to

http://support.lexmark.com

.

For information on Lexmark's privacy policy governing the use of this product, go to

www.lexmark.com/privacy

.

For information on supplies and downloads, go to

www.lexmark.com

.

© 2019 Lexmark International, Inc.

All rights reserved.

GOVERNMENT END USERS

The Software Program and any related documentation are "Commercial Items," as that term is deﬁned in 48
C.F.R. 2.101, "Computer Software" and "Commercial Computer Software Documentation," as such terms are
used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R.
227.7202-1 through 227.7207-4, as applicable, the Commercial Computer Software and Commercial Software

Notices

186

«
...
184
185
186
187
188
...
»

Summary of Contents for CX331













































































































































































































Reviews:

No comments

Related manuals for CX331

Brand: Xerox Pages: 34

Brand: Oki Pages: 40

Brand: DataCard Pages: 2

Brand: Dascom Pages: 138

Brand: Dascom Pages: 166

Brand: QMS Pages: 208

Brand: Canon Pages: 21

imageRUNNER ADVANCE 4251

Brand: Canon Pages: 12

Brand: BCS Pages: 151

WorkCentre PRO 35

Brand: Xerox Pages: 13

Brand: Oki Pages: 20

Brand: Oki Pages: 105

Brand: Lanier Pages: 140

Brand: Canon Pages: 776

imageCLASS LBP913w

Brand: Canon Pages: 327

4039 - B/W Laser Printer

Brand: Lexmark Pages: 49

Brand: Lexmark Pages: 64

Brand: MUTOH Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands