Lexmark CX331 User Manual Download Page 70

Page: 70 / 204

Media Conﬁguration

Universal Setup

Menu item

Description

Units of Measure

Inches

Millimeters

Specify the unit of measurement for the universal paper.

Note:

Inches is the U.S. factory default setting. Millimeters is the

international factory default setting.

Portrait Width

3.00–14.17 inches (8.50*)

76–360 mm (216*)

Set the portrait width of the universal paper.

Portrait Height

3.00–14.17 inches (14*)

76–360 mm (356*)

Set the portrait height of the universal paper.

Feed Direction

Short Edge*

Long Edge

Set the printer to pick paper from the short edge or long edge
direction.

Note:

Long Edge appears only when the longest edge is shorter

than the maximum width supported.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Custom Scan Sizes

Menu item

Description

Custom Scan Size [x]

Scan Size Name

Width

1–8.50 inches (8.50*)

25–216 mm (216*)

Height

1–14 inches (14*)

25–356 mm (297*)

Orientation

Portrait*

Landscape

2 scans per side

Off*

Assign a scan size name and conﬁgure the scan settings.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands