Lexmark CX331 User Manual Download Page 74

Page: 74 / 204

Menu item

Description

Memory Use

All receive

Mostly receive

Equal*

Mostly send

All send

Set the amount of internal printer memory allocated for faxing.

Note:

This menu item prevents memory buffer conditions and failed faxes.

Cancel Faxes

Allow*

Don't Allow

Cancel outgoing faxes before they are transmitted, or cancel incoming faxes
before they ﬁnish printing.

Caller ID

Off

Alternate

Show the telephone number of the person sending the fax.

Note:

This menu item appears only if multiple caller ID patterns are supported.

Fax Number Masking

Off*

From Left

From Right

Specify the format for masking an outgoing fax number.

Digits to Mask

0–58 (0*)

Specify the number of digits to mask in an outgoing fax number.

Enable Line Connected
Detection

Off

On*

Determine whether a telephone line is connected to the printer.

Note:

Detection takes place when turning on the printer and before each call.

Optimize Fax Compatibility

Conﬁgure the printer fax functionality for optimal compatibility with other fax
machines.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Fax Send Settings

Menu item

Description

Resolution

Standard*

Fine

Super Fine

Ultra Fine

Set the resolution of the scanned image.

Note:

A higher resolution increases fax transmission time and requires higher

memory.

Original Size

[List of paper sizes]

Specify the size of the original document.

Note:

Mixed Sizes is the U.S. factory default setting. A4 is the international

factory default setting.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands