Lexmark CX331 User Manual Download Page 75

Page: 75 / 204

Menu item

Description

Content Type

Text*

Text/Photo

Photo

Graphics

Improve the output result based on the content of the original document.

Darkness

1–9 (5*)

Adjust the darkness of the scanned image.

Behind a PABX

Off*

Set the printer to dial a fax number without waiting to recognize the dial tone.

Note:

Private Automated Branch Exchange (PABX) is a telephone network that

allows a single access number to offer multiple lines to outside callers.

Dial Mode

Tone*

Pulse

Specify the dial mode for incoming or outgoing faxes.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Advanced Imaging

Menu item

Description

Color Balance

Cyan to Red

-4 to 4 (0*)

Magenta to Green

-4 to 4 (0*)

Yellow to Blue

-4 to 4 (0*)

Adjust the color intensity during scanning.

Contrast

Best for Content*

Set the contrast of the output.

Background Removal

Level

‑

4 to 4 (0*)

Adjust the amount of background visible on a scanned image.

Note:

If you want to remove the background color from the original document,

then set Background Detection to Content-based. If you want to remove
image noise from a photo, then set Background Detection to Fixed.

Scan Edge to Edge

Off*

Allow edge

‑

edge scanning of the original document.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands