Lexmark CX331 User Manual Download Page 23

Page: 23 / 204

Notes:

•

You can set the printer to receive faxes automatically (set Auto Answer to

) or manually (set Auto

Answer to

Off

•

If you want to receive faxes automatically, then set the printer to pick up on a speciﬁed number of rings.

Setup 2: Printer is sharing the line with an answering machine

Note:

If you subscribe to a distinctive ring service, then make sure that you set the correct ring pattern for

the printer. Otherwise, the printer does not receive faxes even if you have set it to receive faxes
automatically.

Connected to different wall jacks

Connect one end of the telephone cable to the line port of the printer.

Connect the other end of the cable to an active analog wall jack.

Notes:

•

If you have only one telephone number on your line, then set the printer to receive faxes automatically.

•

Set the printer to pick up calls two rings after the answering machine. For example, if the answering
machine picks up calls after four rings, then set the printer Rings to Answer setting to

Set up, install, and conﬁgure

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands