Lexmark CX331 User Manual Download Page 59

Page: 59 / 204

Information Sent to Lexmark

Menu item

Description

Information Sent to Lexmark

Supplies and Page Usage

Device Performance

None*

Send printer usage and performance information to Lexmark.

Note:

Information Send Time appears only when you select any of the settings in

Information Sent to Lexmark, except None.

Information Send Time

Start Time

Stop Time

Note:

An asterisk (*) next to a value indicates the factory default setting.

Restore Factory Defaults

Menu item

Description

Restore Settings

Restore all settings

Restore printer settings

Restore network settings

Restore fax settings

Restore the printer factory default settings.

Maintenance

Conﬁg Menu

Menu item

Description

USB Conﬁguration

USB PnP

Change the USB driver mode of the printer to improve its
compatibility with a personal computer.

USB Conﬁguration

USB Scan to Local

On*

Off

Set whether the USB device driver enumerates as a USB
Simple device (single interface) or as a USB Composite device
(multiple interfaces).

USB Conﬁguration

USB Speed

Full

Auto*

Set the USB port to run at full speed and disable its high

‑

speed

capabilities.

Note:

An asterisk (*) next to a value indicates the factory default setting.

Use printer menus

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands