Lexmark CX331 User Manual Download Page 184

Page: 184 / 204

Compare the Copy Quick Test page with the original document.

Note:

If the margins of the test page are different from the original document, then adjust Horizontal

Adjust and Top Margin.

Repeat

step 5

and

step 6

until the margins of the Copy Quick Test page closely match the original document.

Contacting customer support

Before contacting customer support, make sure to have the following information:

•

Printer problem

•

Error message

•

Printer model type and serial number

Go to

http://support.lexmark.com

to receive e

‑

mail or chat support, or browse through the library of manuals,

support documentation, drivers, and other downloads.

Technical support via telephone is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries
or regions, go to

http://support.lexmark.com

Troubleshoot a problem

184

Summary of Contents for CX331













































































































































































































Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands

Lexmark CX331, User Manual

Search results

Summary of Contents for CX331

Reviews:

Related manuals for CX331

Brands by name

Popular brands