Lexmark 13P0150 - C 750dtn Color Laser Printer, Service Manual

Page: 81 / 262

Diagnostic Information
2-61
5060-XXX
Problems with excessive static electricity buildup.
The printer does not recognize one or more output options as
installed.
Note: If more than a single output option is installed, check each one to see if the printer
recognizes any single option as being installed. If the printer recognizes any of the output
options then the base printer autoconnect system is operating correctly and the problem
is in the unrecognized option. Continue with this service check or go to the service check
of the failing output option.
7
Ready - Bin X Full displays and paper feeds into Bin X Go to “Ready -
Bin X Full
displays and
paper feeds
into Bin X.”
on page 2-65
Go to Step 8
8
Paper does not feed into the bin selected. 271 Paper Jam -
Check Bin 1 displays Go to “Paper
does not feed
into the bin
selected. 271
Paper Jam -
Check Bin 1
displays.” on
page 2-65
Go to Step 9
9
990 Service Error Displays Go to “990
Service Error
Displays” on
page 2-65
Call your next
level support
Step Action and Questions Yes No
1
Excessive static electricity buildup. (Front Cover Assembly)
Check the front cover assembly to make sure the ESD
brush ground lead is firmly attached to the 5-Bin Mailbox
frame or the ESD brush is not loose or damaged.
Is the ESD Brush ground cable correctly installed and the
ESD brush is not loose or broken? Check to make
sure the brush
is contacting
the media
being fed
through the
option. 1. Attach the
ground cable
if not installed
2. Replace the
cover
assembly if
the ESD
brush is loose
or damaged
Step Symptoms Yes No