Lexmark 13P0150 - C 750dtn Color Laser Printer, Service Manual

Page: 138 / 262

3-18
Service Manual
5060-XXX
Print Line Length Page
This test prints a color test page that is used to measure the temperature of the
printheads and the reading from the PSD at calibration time.
To run the Print Line Length Page, select Print Line Length Page from the menu. No
buttons are active while the Print Line Length Page is printing. Press Return to exit.
Print Registration
The print registration range is as follows:
Bottom Margin: -25 to +25
Top Margin: -25 to +25
Left Margin: -12 to +12
Right Margin: -12 to +12
To set Print Registration:
1.
Select Registration from the Diagnostic menu.
2.
The Top margin sign/value pair blinks. This indicates it is the margin value being
changed.
3.
To select the margin value to change, press Select until the margin value pair you
want to change is blinking.
4.
To change the margin value press Menu. When the value you want is displayed,
press Select to save the value.To exit the Registration menu, press Return.
To verify the margin values are correct you must print the "Quick Test Page" from the
registration screen. Press Go to print the test page. While printing the “Quick Test
Printing” message displays. Once printing is complete, the Registration screen displays.
The "Quick Test Page" should be printed on letter or A4 paper.