Lenovo ThinkServer RD210, Hardware Maintenance Manual

Page: 86 / 182

000000
000000
000000
000000
000000
0
0
0
000000
000000
000000
000000
000000
Removing and installing a hot-swap hard disk drive
The following notes describe the type of internal drives that the server supports and other information
that you must consider when installing a drive. For a list of supported hard disk drives, go to
www.lenovo.com/thinkserver and click on the
Options tab.
• Locate the documentation that comes with the drive and follow those instructions in addition to the
instructions in this chapter.
• Make sure that you have all the cables and other equipment that are specified in the documentation that
comes with the drive.
• Select the bay in which you want to install the drive.
• Check the instructions that come with the drive to determine whether you have to set any switches or
jumpers on the drive. If you are installing a SAS or SATA hard disk drive, be sure to set the SAS or
SATA ID for that device.
• The server supports six 2.5-inch hot-swap SAS or hot-swap SATA hard disk drives.
• All hot-swap drives in the server should have the same throughput speed rating. Mixing hard disk drives
with different speed ratings will cause all drives to operate at the lower throughput speed.
• Do not mix SAS and SATA hard disk drives in the same system.
• The electromagnetic interference (EMI) integrity and cooling of the server are protected by having all bays
and PCI and PCI Express slots covered or occupied. When you install a drive, PCI, or PCI Express
adapter, save the EMC shield and filler panel from the bay or PCI or PCI Express adapter slot cover in the
event that you later remove the device.
• For a complete list of supported optional devices for the server, go to www.lenovo.com/thinkserver and
click on the Options & Software tab.
To remove and install a hot-swap hard disk drive, complete the steps in this section.
Removing a hot-swap hard disk drive
To remove a hot-swap hard disk drive, complete the following steps.
Attention:
78
ThinkServer RD210 Hardware Maintenance Manual