LELY COSMIX S, Manual, Page: 39 / 102

Description and Operation 4-13
D-I011.1106EN
innovators in agriculture
4.4.2.2 Settings
The menu 'Settings' is used to define basic settings that are necessary for
correct operation.
The menu has the following items:
•
Set defaults
•
Time
•
Imperial Units
•
Keep blocker open
•
Photocell active
•
Weigh unit on
•
Portion size1
•
Portion size2
•
Portion size3
•
Portion size4
•
Portion size5
•
CalibrateTagsActive
•
Cal. Tag1
•
Cal. Tag2
•
Cal. Tag3
•
Cal. Tag4
•
Cal. Tag5
•
Feedsensor Present.
Menu item 'Set defaults' resets the value of all items in this sub-menu to
the default values.
The menu item 'Time' displays the current time and date. The time and
date are automatically synchronized with the T4C software.
The menu item 'Imperial Units' is used to switch from display of metric
units to imperial units.
The menu item 'Keep blocker open' is only applicable for service
engineers.
In the IR version of the COSMIX S a photocell is installed to support the
ID-detector. The setting Photocell active is used to switch ON the
photocell (value 0 is OFF, value 1 is ON).
The menu item 'Weigh unit on' is not used.
The menu items 'Portion size1', 'Portion size2', 'Portion size3' or 'Portion
size4' are used to set the portion size of each dosing unit. By default the
portion sizes for feed types 1 to 4 are 61, 62, 63 and 64 grams. Menu
item 'Portion size5' is not used.
Note:
The last portions fed can be less than the set ‘Dose portion’ to feed exactly the
actual balance of a cow.
The menu item 'CalibrateTagsActive' is used to switch ON or OFF the
calibration procedure.
The menu items 'Cal. Tag1' - 'Cal. Tag4' are used to calibrate the dosing
units 1-4. 'Cal. Tag5' is not used.