LELY COSMIX S, Manual, Page: 36 / 102

4-10 Description and Operation
D-I011.1106EN
innovators in agriculture
Figure 10. The T4C screen overview
KEY:
1. Header - 2. Navigation bar - 3. Data page
4.3.2 CRS+
When the optional feed presence sensor is installed, the CRS+ displays an
alarm message when the throughput of feed is blocked.
4.4 Service Interfaces
The COSMIX S has the following service interface:
•
E-Link Manual Controller
•
T4C Farm Management software
•
Cosmix Service Interface.
4.4.1 The E-Link Manual Controller
The E-Link Manual Controller controls and monitors the COSMIX S and
communicates with the management software.
The E-link Manual Controller has an LCD display and nine buttons that
enable the user to give commands and change values in the COSMIX S.
The LCD display also shows reports and alarms.
The connector of the E-Link Manual Controller is on the front side of the
control unit.
The E-Link has the following buttons:
•
Button (1) confirms the action on the LCD display above the
applicable button
•
Button (2) starts or stops an action
•
Button (3) opens the selected function or the next menu screen
•
Button (4) returns to the previous screen