LELY COSMIX S, Manual, Page: 15 / 102

xv
D-I011.1106EN
innovators in agriculture
8.4 Make Basic Software Settings 8-3
8.4.1 Display the Software Version 8-3
8.4.2 Reset to the Default Settings 8-3
8.4.3 Set the Time 8-3
8.4.4 Make the Photocell Active 8-4
8.4.5 Calibrate the Valves 8-4
8.4.6 Set the Portion Size 8-5
8.4.7 Adjust the Portion Size 8-5
8.4.8 Clear all Tables 8-5
8.4.9 Set the Feed Present Sensor ON 8-6
8.4.10 Calibrate the Empty Feed Bin Value 8-6
8.5 Test the Operation of the COSMIX S 8-6
8.5.1 Test the Time Setting 8-6
8.5.2 Display Real Time Information 8-7
8.5.3 Test the Tag-ID 8-7
8.5.4 Test the Dosing Units 8-7
8.5.5 Test the Feed Detection System 8-8
8.6 Adjust the Floor Antenna Signal (Qwes-LEG models only) 8-8
8.7 Adjustments in the T4C Software 8-10
8.7.1 Add the COSMIX S to T4C 8-10
8.7.2 Add a Feed Type 8-11
8.7.3 Set the Feed Speed 8-11
8.8 Adjustments with the Service Interface 8-12
8.8.1 Calibrate the Valves with the Service Interface 8-12
9. Troubleshooting 9-1
9.1 Troubleshooting Table 9-1
9.2 Recovery Procedures 9-2
9.2.1 Make Sure the Cow has Feed Credit 9-2
9.2.2 Make Sure the Cow Number is less than 32000 9-2
9.2.3 Clean the Dosing Unit 9-2
10. Diagrams 10-1
10.1 Overview COSMIX S with One or Two Feed Hoppers 10-1
Glossary of Terms
Index