28
Instruction Manual V1.1 01/2001
Fig. 28.1
10. Universal knife holder base
1
3
2
Fig. 28.3
Fig.28.2
1
The handling of the various knife holders is
described in chapter 15.
10.2 Mounting the knife holder
To release, turn the clamping lever
(1)
counterclock-
wise.
Slide the guide of the knife holder
(2)
onto the T
piece
(3)
of the knife holder base.
To lock, turn the clamping lever
(1)
clockwise.
10.3 Adjusting the clearance angle
The scale for the clearance angle adjustment (0°, 5°
and 10°) is located on the right side of the knife holder.
A reference point is provided on the hand rest.
Moreover, a reference line is provided on the right side
of the knife holder base to adjust the angle when the
hand rest is removed.
To release, turn the clamping lever
(1)
counterclock-
wise.
To adjust the clearance angle, slide the knife holder
on the base until the reference point on the hand
rest or line is located next to the scale line for the
required adjustment.
When adjusting the angle without the hand rest,
slide the knife holder on the base until the refer-
ence line on the knife holder base is located below
the scale line for the required adjustment.
Hold the knife holder in this position and fix the ad-
justment by turning the lever
(1)
clockwise.
Summary of Contents for RM2155
Page 2: ......
