Leica BIOSYSTEMS 14 0493 80101, Instructions For Use Manual

Page: 59 / 102

59 HistoCore PEARL
Operation
5
• Checkbox “Enable RemoteCare Events” ( → "Fig. 45- 4 ") : The check box “Enable RemoteCare Events”
only affects instrument events sent to the RemoteCare server. If checked, the instrument will actively
send events to the server. If not checked, it will not send any events. This is the standard setting.
The RemoteCare server can remotely request events or (with permission of the customer) trigger
software updates no matter if box is checked or not.
• Checkbox “Direct Connection” ( → "Fig. 45- 2 ") : The check box “Direct Connection” determines
whether a direct connection to the Leica RemoteCare service or to a “proxy server” shall be used. If
the instrument shall connect the RemoteCare server directly, please check the “Direct Connection”
check box. If selected, the proxy settings underneath it will be greyed out. This is the standard
connection method. If a proxy server shall be used, uncheck the “Direct Connection” checkbox and
set the proxy parameters (Proxy User Name, Proxy Password, ProxyIP Address and Proxy Port).
Editing Remote Care parameters
L
Only Supervisor and Service user level can edit Remote Care parameters whilst there is not a
program running.
L
Make sure that the instrument is connected to the network.
1. Press Network ( → "Fig. 45- 1 ") .
2. Uncheck Direct Connection ( → "Fig. 45- 2 ") , and the proxy parameters fields are enabled
(
→
"Fig. 45- 3 ") .
3. Edit the parameters.
4. Check
Enable Remote Care Events
( → "Fig. 45- 4 ") .
5. Press
Save
( → "Fig. 45- 5 ") .
5.3 Reagents
5.3.1 Reagent status
This window is to display the current reagent status of the stations. Reagent stations can be marked as
full or empty here.
The following is displayed.
• Station - 1-13 bottles, 3 paraffin baths
• Reagent
• Exchange date
•
Status
- Full/Empty
• One of the following columns based on the RMS mode settings
--
Cassettes since change
- Cassettes processed since last change. It is displayed if the RMS mode is
set to be Cassettes.
--
Cycles since change - Cycles processed since last change. It is displayed if the RMS mode is set to
be Cycles.
Note
For the Cleaning reagent, the cycle number is recorded as 1 cycle after the whole Cleaning
program is completed.
-- Exchange date - Days since last change. It is displayed if the RMS mode is set to be Days.
-- Expiry Date . It is displayed if the RMS mode is set to be Days.