manualshive.com logo in svg

Leica BIOSYSTEMS 14 0493 80101, Instructions For Use Manual

Share
Download
Leica BIOSYSTEMS 14 0493 80101 Instructions For Use Manual Download Page 23

23

HistoCore PEARL

 

Initial Operation

4

4. 

Initial Operation

4.1 

Installation site requirements

• 

The instrument requires an installation area of approximately 700 x 800 mm.

• 

The substrate must have a sufficient load capacity and rigidity with respect to the weight of the 
instrument.

• 

The instrument is designed for indoor use only.

• 

The instrument must be installed in a place that ensures an easy disconnection from the power 
supply. The power cable must be in a place that can be easily reached.

• 

No extension cable can be connected.

• 

The instrument MUST be connected to a grounded power socket.

• 

Use only one of the provided power cables that is intended for the local power supply.

• 

Avoid vibrations, direct sunlight and heavy variation in temperature.

Caution 

The chemicals used in the HistoCore PEARL are easily inflammable and hazardous to health. Therefore 

the installation location must be well ventilated, and must contain no open flames. The room in which the 

instrument is located must not be used as a permanent station for people. Otherwise the room must be 

equipped with an exhaust device.
The installation location must be protected against electrostatic discharge.
Do not operate the instrument in rooms with explosion hazard.
To ensure proper function of the instrument, it must be set up while maintaining a minimum distance of 

10 cm from walls and furniture. 

4.2 

Standard delivery - packing list

Note 

To prevent damage to the instrument or specimens, only accessories and spare parts authorized by 

Leica Biosystems can be used. 

Quantity

Part description

Order No.

1

HistoCore PEARL instrument

14 0493 50667

1

Display module

14 0493 50642

14

Reagent bottle assembly

14 0493 50465

1

Paraffin drip tray

14 0493 50570

1

Bottom tray

14 0493 55572

1

Bottle label

14 0493 50467

2

Basket assembly

14 0493 51403

1

Paraffin scraper

14 0393 53643

1

Maintenance kit, consists of

14 0493 53391

10 O-rings

14 0493 51361

1 Lubricant, Molykote 111, 100g

14 0336 35460

10 Seal bottle cap, normal

14 0461 36136

Summary of Contents for 14 0493 80101







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands