manualshive.com logo in svg

Leica BIOSYSTEMS 14 0493 80101, Instructions For Use Manual

Share
Download
Leica BIOSYSTEMS 14 0493 80101 Instructions For Use Manual Download Page 33

33

HistoCore PEARL

 

Initial Operation

4

Caution 

Only clean baskets can be used for tissue processing.

Note 

It is recommended to use Leica Biosystems predefined/validated consumable (cassettes). 

Note 

Do not add more than 200 cassettes into the retort during processing. 

Note 

HistoCore PEARL basket can be used in ASP6025.

4.4.7  The display

Fig. 14 

 

• 

The HistoCore PEARL is programmed and operated via a color LCD touchscreen. 

• 

A screen saver will turn off the screen display if no key has been pressed for 30 minutes. Press any 
part of the touchscreen to restore the screen. After having been restored, the on-screen functions 
will be non-operational for a few seconds to avoid accidental touch of any keys. 

• 

The touchscreen is fastened to a stable base with four screws. All terminals are protected from 
contact with reagents. The touchscreen itself is resistant to all reagents used in the instrument. 
Despite this, avoid any reagent contamination to the screen. Immediately wipe any reagent splashes!

Summary of Contents for 14 0493 80101







































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands