7. 3D ASSIST DISPLAY FEATURE
59
7.
3D ASSIST DISPLAY FEATURE
This chapter explains the 3D assist display feature, which is activated when you set F•1 INPUT
MODE to 3D ASIST in the multi-screen display feature.
In the 3D assist display, you can evaluate 3D video signals by applying the video signal for the
left eye and the video signal for the right eye. The supported format is HD-SDI (single link).
Use F•2 3D FUNCTION on the multi-screen display menu to configure the 3D assist display
settings. This setting is available when F•1 INPUT MODE is set to 3D ASIST.
MULTI (press and hold)
→
F•2 3D FUNCTION
→
Figure 7-1 3D FUNCTION menu
7.1
Selecting the Input Signal
To select the input signal, follow the procedure below.
Procedure
MULTI (press and hold)
→
F•5 3D INPUT FORMAT
Settings
L/R DUAL: The video signal for the left eye applied to channel A and the video signal for the
right eye applied to channel B are combined and measured. Apply signals that
are the same format to channels A and B. This is the default setting.
HF SbyS:
The side-by-side signal applied to channel A or channel B is measured.
TOP&BOTM: The top-and-bottom signal applied to channel A or channel B is measured.
Video signal for the left eye
Video signal for the right eye
3D INPUT FORMAT = L/R DUAL
(channel A)
(channel B)
Side-by-side signal
3D INPUT FORMAT = HF SbyS