6. MULTI-SCREEN DISPLAY FEATURE (MULTI)
54
6.6
Switching between the Video Signal Waveform and Histogram Sub Items
When (1) F•1 INPUT MODE is set to SINGLE and F•2 DISPLAY MODE is set to PIC+WFM1
or PIC+WFM2 or (2) F•1 INPUT MODE is set to 3D ASIST (excluding the case when F•3
MEASURE SELECT is set to DISPRTY), to switch between the video signal waveform and
histogram sub items, follow the procedure below.
Procedure
MULTI (press and hold)
→
F•4 DISPLAY FORM
→
F•1 SUB-ITEM
Settings
WFM:
The video signal waveform display appears. This is the default setting.
HISTGRM: The histogram display appears.
SUB-ITEM = WFM
SUB-ITEM = HISTGRM
Figure 6-7 Video signal waveform and histogram displays
6.7
Configuring Video Signal Waveform Settings
Press F•2 WFM SETUP on the Multi-Screen Display menu to configure video signal
waveform settings. This setting is available when F•5 3D INPUT FORMAT is set to L/R DUAL
and F•1 SUB-ITEM is set to WFM. Use this menu to select the display format and the
waveform color.
MULTI (press and hold)
→
F•4 DISPLAY FORM
→
Figure 6-8 WFM SETUP menu