12. VECTOR DISPLAY (VECT)
134
12.2.5
Setting the Vector Intensity
To set the vector intensity, follow the procedure below.
Regardless of this setting, in the multi-screen display, vectors are displayed using the
intensity that WFM INTEN is set to. (This excludes the VEC+PIC setting on the 2-channel
display.)
If you press F•D 1, the intensity will be set to its default value of 0.
[Reference] WFM
INTEN
→
Section 11.3.6, “Setting the Video Signal Waveform Intensity”
Procedure
VECT (press and hold)
→
F•1 INTEN/SCALE
→
F•D 1 VECTOR INTEN
Settings
Setting range: -128 to 127. (The default setting is 0.)
12.2.6
Setting the Scale Intensity
To set the scale intensity, follow the procedure below.
If you press F•D 2, the scale intensity will be set to its default value of 4.
Procedure
VECT (press and hold)
→
F•1 INTEN/SCALE
→
F•D 2 SCALE INTEN
Settings
Setting range: -8 to 7. (The default setting is 4.)
12.3
Gain Settings (GAIN)
To set the gain, press F•2 GAIN in the vector menu.
F•2 GAIN appears when MODE is set to VECTOR.
[Reference] MODE
→
Section 12.5.1, “Switching between the Vector and 5 Bar Displays”
VECT (press and hold)
→
F•2 GAIN
→
Figure12-4 GAIN menu
12.3.1
Setting the Fixed Gain
To set the fixed vector gain, follow the procedure below.
Procedure
VECT (press and hold)
→
F•2 GAIN
→
F•1 GAIN MAG