Home
/
Leader
/
LV 5380 OP72
/
Instruction Manual

Leader LV 5380 OP72, Instruction Manual, Page: 105 / 232

Share

Page: 105 / 232

Leader LV 5380 OP72 Instruction Manual Download Page 105

10. PICTURE DISPLAY (PIC)

92

10.4.3

Displaying an Aspect Marker

To display an aspect marker, follow the procedure below.
There are three kinds of aspect marker: line, shadow, and black. The aspect marker type
can be set using F•D 1 SHADOW.

Procedure

PIC (press and hold)

→

F•2 MARKER

→

F•3 ASPECT

Settings

OFF:

An aspect marker is not displayed. This is the default setting.

14:9:

A 14:9 aspect marker is displayed.

13:9:

A 13:9 aspect marker is displayed.

4:3:

A 4:3 aspect marker is displayed.
This option cannot be selected when the input SDI signal is set to SD and the
display is set to 4:3.

2.39:1:

A 2.39:1 aspect marker is displayed.
This option cannot be selected when the input SDI signal is set to SD.

16:9:

A 16:9 aspect marker is displayed.
This option cannot be selected when the input SDI signal is set to HD or SD
and the display is set to 16:9.

HD SD

Figure10-8 Displaying an aspect marker

10.4.4

Selecting the Aspect Marker Type

To select the aspect marker type, follow the procedure below.
This setting is available when F•3 ASPECT is set to any value other than OFF.

Procedure

PIC (press and hold)

→

F•2 MARKER

→

F•D 1 SHADOW

Settings

0%:

The aspect marker is indicated with a line.

1 to 99%:

The area around the aspect marker is indicated with a shadow. The default
setting is 50 %.

100%:

The area outside the aspect marker is indicated with black space.

«
...
103
104
105
106
107
...
»

Summary of Contents for LV 5380 OP72









































































































































































































































Reviews:

No comments