manualshive.com logo in svg

Leader LV 5380 OP72, Instruction Manual, Page: 26 / 232

Share
Download
Leader LV 5380 OP72 Instruction Manual Download Page 26

2. SPECIFICATIONS 

13

 

2.3.15 Time 

Display 

Current Time Display 

Time display based on the internal clock 

Elapsed Time 

Time elapsed since the error count was cleared 

Time Code 

LTC or VITC 
(In a dual link signal, only link A is supported) 

Compliant Standard 

SMPTE 12M-2 

 

2.3.16 3D 

Assist 

Display 

Supported Format 

HD-SDI (Single link) 

Input Connectors 

L/R Dual 

Video Signal for the Left Eye 

Channel A 

Video Signal for the Right Eye 

Channel B 

Side-by-Side, Top-and-Bottom 

Channel A, Channel B 

 

Picture Display 

Anaglyph Display 

Description 

Color or monochrome 

Color 

Green and blue are masked from the video 
signal for the left eye, and red is masked from 
the video signal for the right eye. These signals 
are then combined. 

Monochrome 

Green and blue are masked from the 
monochrome video signal for the left eye, and 
red is masked from the monochrome video 
signal for the right eye. These signals are then 
combined. 

Convergence Display 

A 50 % offset is added to the difference 
between the monochrome video signal for the 
left eye and the monochrome video signal for 
the right eye. 

Overlay Display 

The levels of the video signal for the left eye 
and the video signal for the right eye are halved. 
These signals are then combined. 

Checker Display 

Displays the video signal for the left eye and the 
video signal for the right eye in a checkerboard 
pattern. 

Boundary Lines 

Can be moved up, down, left, and right 

Wipe Display 

Description 

The video signal for the left eye and the video 
signal for the right eye are divided by boundary 
lines and displayed. 

Left-Right Boundary Line 

The part to the left of the boundary line is the 
video signal for the left eye. The part to the right 
of the boundary line is the video signal for the 
right eye. 

Summary of Contents for LV 5380 OP72









































































































































































































































Reviews:

No comments